Customer:Jereh / Uz­ Kor Gas Chemical" JV LLC

Engineering, material procurement, manufacture, during inspection, testing, painting, record keeping (documentation), preparation for shipment and delivery, installation and commissioning of the low pressure compressor station at CGTU Surgil and inlet separator together with pipelines, valves, and instrument equipment within the range of skid to CGTU Surgil.

There are low pressure wells at Surgil field, from which gas extraction is impossible or ineffective during its delivery to the common header of the bulk stream to CGTU Surgil.

BCU LP with gas piston motor is intended for compression of LP gas from low pressure wells, capacity of Modular low pressure compressor station 350 000 - 500 000 m3/day. Compressed gas from the outlet of BCU LP unit shall be supplied to the inlet to CGTU Surgil, will be used, if required, as a fuel gas for the needs of planned BCS Surgil.

-  Development of the detailed design documentation for the manufacturing and supply of materials and equipment for a hangar:

civil part, including the calculation of the steel structures, 3-D model of the building;

electrical part (electric power supply of the consumers, lighting, earthing);

automatic fire ala.nu and fire extinguishing system (AFA&FE);

- Provision of technical support to the Customer.  State expert review of the design documentation.

                      .

CGTU Surgil (Canopy for the booster piston compressor at CGTU)

Customer: China Gezhouba Group International Engineering Co., LTD (CGGC)

Syrdarya Combined Cycle Power Plant Project located in Shirin Site; Uzbekistan is being     developed on EPC basis.

The proposed combined cycle power project shall consist of four combined cycle blocks in a 4-4-4 configuration having four (4) Gas Turbine Generators (GTG) + four (4) Heat Recovery Steam Generators (HRSG) + four (4) Steam Turbine Generators (STG).

The project consists of a combined cycle heat and power plant with nominal capacity of 2868 MW of electrical output.

  The main fuel for the power plant shall be natural gas and HRSG supplementary duct firing has     been envisaged. Forced type cooling tower shall be considered for the Condenser cooling System and Wet cooling tower shall be considered for the Closed Cooling water System.

-        Support during development and adaptation of the General layout plan.

-        Adaptation of the Basic design and Detailed design – is performed via review of the whole set of documentation.

-        Consulting support of the Customer.

-        Development of the Industrial safety declaration (local analogue of HAZOP).

-        Development of the Environmental Impact Assessment/ Statement.

Construction of CCGT Power Plant Project in Sirdarya Region.

Customer: Mitsubishi Heavy Industries
End Customer: “Navoiyazot” JV

Construction of a complex on production of 660 thous. tons of ammonia and 577.5 thous. tons of urea per year by integration of the technologies of the leading world licensors, particularly: on ammonia - Haldor Topsoe (Denmark), on synthesis and granulation of the urea - Saipem (Italy) and Uhde Fertilizer Technology (Netherlands).

Providing integrated engineering services, including the development of the design documentation for HVAC; technical consultation; delivery, mounting and start-up and commissioning of the firefighting equipment; installation and technical maintenance of the CCTV systems; delivery and mounting of illumination devices; delivery and mounting of the electric power supply systems for HVAC; organization of an independent CCTV system; start-up and commissioning of the firefighting system.

Construction of a chemical complex on production of ammonia and urea in Navoiy

Customer: “LUKOIL Uzbekistan Operating Company” LLC
General Contractor: HYUNDAI ENGINEERING CO., LTD. (Korea)

Development of gas fields (Kandym, Accum, Parsankul, Hodgi and Western Hodgi) located in Karakul area, Bukhara region of the Republic of Uzbekistan.

The plans on development of the Kandym group of fields provide the complex of works on development of a unique production facility that will include:

gas gathering system with pipeline length more than      400 km;

gas processing plant of 8.1 billn.m3/year gas      production;

export gas pipeline of more than 70 km length;

water supply facilities including 90 km length      pipelines;

external power electric supply facilities (OHL      220kD, s/s 220/110/35 kV);

gas turbine power plant of more than 80 MW;

commodity park and goods loading terminal;

A role in the works at FEED stage, adaptation of the design documentation as per the norms and rules effective on the territory of the Republic of Uzbekistan, as well as support during obtaining of the required permissive documents and approvals during realization of the project.

The following works were performed during this year:

Performance of category calculations of premises,      buildings and external installations of CPF and Kandym group of fields on      explosion and fire safety as per ShNK 2.01.19 in the frame of the project      “Construction of CPF complex and development of Kandym group of fields”;

Revision of design documentation for the compliance      with (existing) norms effective on the territory of the Republic of      Uzbekistan;

Development of the industrial safety declaration of      the hazardous production facility “Construction of CPF complex and      development of Kandym group of fields” of project documentation developed at FEED stage.

Development of the detail design of the facilities of the CPF utilities area and the Kandym group of fields, gas gathering systems from the wells until the CPF, including the motor roads, High voltage transmission lines 10kD-35kV, structures, optical cable, external water supply pipelines, etc.;

in total more than 350 km of the pipeline system with the corresponding facilities.

The designer supervision for construction of the facility “Line facilities of gas gathering system of gas gathering stations of Kandym field: GS-1 and GS-2”;

Development of the DD for loading to r/r tanks at CPF and the railroad warehouse of the Utilities area;

Complex of design works for the facility “Construction of the facility “Stabilized condensate loading unit to the railroad tanks at CPF Kandym. POL and methanol receiving and storage area at the Utilities area””.

Construction of CPF complex and development of Kandym Group of fields, Gas gathering system

Customer: OZGUVEN TASARIM MIMARLIK INSAAT SANAYI VE TICARET A.S.
End Customer: MURAD BUILDINGS

One of the tallest buildings in Central Asia the Nest One (266.5 m) will become the special project, built based on the international standards, with impeccable architectural design and residential premises that are designed in compliance with the Nest comfort standards. The skyscraper at this moment is being constructed on the territory of the IBC Tashkent City.

-          development of the Special technical conditions (STC) for the Project together with the Customer and providing it for the revision and approval of the Minstroy (Ministry of Construction), as well as approval and technical support of the Customer during the approval process;

-          development of additional calculations for the STC, if required;

-          revision of the detail design documentation for the compliance with the norms and requirements of the legislation of RUz and provision of the recommendations to the developed detail design documentation in the form of comments in English;

-          support during development of detailed design and analysis of design solutions used by the Customer;

-          consultation of the Customer during development of the documentation up to the Approved For Construction (AFC) revision, required for construction activities in Uzbekistan, providing timely advise and instructions on data submission and documents customization and formatting in accordance with the legislation of RUz.

-          support during expert review of detailed design developed under the Project in Minstroy; Timely provision of information on the status and comments received from Minstroy;

-          design of all the connections to the external communications (connection to the gas, water and electric supply networks, etc.).

Construction of a multifunction complex Nest ONE on the territory of IBC Tashkent City

End Customer: LUKOIL Uzbekistan Operating Company.
General Contractor: Hyundai Engineering (Korea)

Development of Kuvachi-Alat field located in Karakul district of Bukhara province of the Republic of Uzbekistan, for extraction of natural gas and associated condensate in the volume of 1.86 billion m3/year. 12 production wells are located on the contract site. Development of the northern part of Shadi area located in Alat district of Bukhara province of the Republic of Uzbekistan, for production of natural gas and the associated condensate in the volume of 0,7 bln m3/year. 9 production wells are located on the contract site.

Development of FEED design documentation.

Development of detailed design documentation for the      facilities of “Kuvachi Alat” and Northern Shady field, as well as      provision of the designer construction supervision, namely:

Gas flowlines from the wells until the gas gathering      stations;

Cathodic protection and power supply system for ECP      means and gas flow lines;

55 km gas pipeline from Kuvachi Alat PGPT to      Northern Shadi PGPT;

Automobile road with total length of 100 km;

Development of plot plans for wells, GGS, water      intake facility and PGPT;

Development of buildings and structures at the PGPT.

“Early gas of Kandym” group of fields and development of the  northern part of Shadi area, Kuvachi Alat fields, 1st start-up complex

End Customer: “LUKOIL Uzbekistan Operating Company” LLC
General Contractor: Enter Engineering Pte., Ltd. (Singapore)

The scope of the works included the development and correction of the documentation. The design documentation was developed based on the approvable part of the detail design.

Development and adaptation of the Detail design of the Field support base at the gas field Djarkuduk-yangi Kizilcha

Customer: Çalık Enerji A.Ş.
General Contractor: Mitsubishi Corporation
and Mitsubishi Hitachi Power Systems (MHPS)
End Customer: State Joint Stock Enterprise “Uzbekenergo”

·         The works on calculation of the category on explosion and fire safety of the premises, buildings and external installations as per the ShNK 2.01.19-09 and their approval with the relevant state bodies of RUz.

·         revision of the detail design documentation for the compliance with the norms and requirements of the legislation of RUz and provision of the recommendations to the developed detail design documentation in the form of comments in English;

Construction of a thermal electric power plant Turakurgan

·         The works on calculation of the category on explosion and fire safety of the premises, buildings and external installations as per the ShNK 2.01.19-09 for the project “Expansion of Navoi TPP with construction of the second combined cycle plant of 450 MW (CCPP Navliy-2)” and their approval with the relevant state bodies of RUz.

·         Development and approval of the detail design documentation for installation of an additional pipeline-receiver in the fuel gas supply line of CCP-2 and Navoiy TPP.

Expansion of Navoi TPP with construction of the second combined cycle plant of 450 MW

Customer: “LUKOIL Uzbekistan Operating Company” LLC
Contractor: KNM PROCESS SYSTEMS SDN. BHD. (Malaysia).

The project was implemented under the contract with KNM for technical assistance in front-end engineering design and coordination of the local detail design “External water supply of Adamtash, Gumbulak and Djarkuduk - Yangi Kyzilcha” fields with the End Customer.

Review and provision of written comments in terms of      project documentation for the facility “External water supply of Adamtash,      Gumbulak and Djarkuduk-Yangi Kyzylcha fields”  developed by OJSC      “Uzsuvloyiha”.

Provision of technical and engineering services in      order to bring the project documentation in compliance with the customer      requirements.

Provision of technical and engineering services in      order to bring the project documentation in compliance with the norms and      regulations of the Republic of Uzbekistan, and the requirements of LUKOIL      Uzbekistan Operating Company.

External water supply to Adamtash, Gumbulak and Jarkuduk - Yangi Kizilcha fields

End Customer: JV “Uz-Kor Gas Chemical” LLC

The Ustyurt Gas Chemical Complex consists of five gas separation units, ethylene production facility, polyethylene, polypropylene production units, energy generation facilities and has up-to-date infrastructure facilities.

The project was realized in conjunction with Korean companies such as Korea Gas Corporation (KOGAS), Lotte and STX Energy. Samsung Engineering, GS Engineering and Hyundai Engineering also participated in the project as the General Contractors of the project. Uz-Kor Gas Chemical was founded by Uzbek and Korean companies in May 2008 with a purpose of development, financing, construction and operation of the integrated project on processing of oil and gas in Ustyurt region, Uzbekistan. The cost of the project made up 4 billion USD.

Scope of work: Provision of the integrated engineering services, including adaptation and development of the project documentation, technical consultation, designer supervision, support and participation in commissioning works of utility facilities.

Long term technical and consulting support during operation and re-design of different facilities of Ustyurt Gas Chemical Complex

Customer: Shurtan USC
General Contractor: KMPO Motor Ltd (Russia)

The “Booster compressor station-2 at Shurtan field” is used for compression of the gas with the decreasing input pressure from 2.0 to 0.5 MPa which is compressed until 3.0-3.6 MPa to provide the efficient operation of the existing BCS-1 Shurtan. The capacity of the gas compression at the BCS-2 is expected in the volume from 25.8 mill.m3/day for the year 2015 and decreasing upto 6.1 mill.m3/day for the year 2030. The gas to the inlet of the BCS-2 is supplied from the outlet of the Gas pre-treatement unit of PGPT-1, 2 Shurtan and from other fields of Shurtan group of fields.

Development of the basic design and detailed design documentation and the designer supervision.

Stage - 1. Development of main technical solutions for all disciplines, process calculations, development of the principal - process flow diagrams (PFD and P&ID), data sheets, specifications and list of equipment

Stage - 2. Development of the detailed design documentation in full set and scope which is required for the realization of the construction of the facility.

Stage - 3. Provision of designer construction supervision.

Design for construction of the second booster compressor station (BCS) at Shurtan field

FEED2 stage of development. Participation of SCATRA Limited during the development of the FEED2 stage and in the conceptual design of the main buildings, as well as the detail design of the building structures, process equipment and the pipe racks.

General Contractor: HYUNDAI ENGINEERING CO., LTD. (Korea)

Revision of design documentation of fire safety for      the compliance with requirements of the Republic of Uzbekistan in the      frames of Uzbekistan GTL project;

Rendering consultative services on fire safety      within the frames of the project on production of liquefied synthetic fuel      GTL (GAS-TO-LIQUID) in the Republic of Uzbekistan;

Revision of firefighting design documentation for      the compliance with (existing) norms and rules effective on the territory      of the Republic of Uzbekistan;

Performance of category calculations of premises,      buildings and external installations of CPF and Kandym group of fields on      explosion and fire safety as per ShNK 2.01.19 in the frame of the project      “Construction of a plant on production of liquefied synthetic fuel GTL      (GAS-TO-LIQUID) in Uzbekistan”.

Design of the out of battery limit facilities      “Project on production of the liquefied synthetic fuel in Uzbekistan      (UZGTL)”.

Work at FEED2 and design stages of the Construction of the gas-to-liquid fuel unit (UZGTL)

End Customer: GAZPROM JV in Uzbekistan
 General Contractor: Enter Engineering Pte., Ltd. (Singapore)

Construction of the low pressure gases gathering system and the booster compressor stations (BCS) for utilization of the associated oil gases in the volume 2.6 million m3/day (0.955 billn m3/year) produced by the flare systems of the oil and condensate degassing units at Western Kruk, Kruk, Northern Urtabulak, Umid fields, and the separated gas of the Gas Complex Preparation Terminal of South Kemachi, and by supplying the compressed gas to the GCPT South Kemachi for treatment and further transportation to the CPF for processing.

Development of the technical conditions (TC) on the turn-key basis, feasibility study of the project and development of the detailed design documentation:

Stage - 1. Development of the technical specifications      for the construction of the facility “Utilization of the low pressure      associated gases on South Kemachi, Kruk, Western Kruk, Northern Urtabulak,      Umid fields” on a turn-key basis.

Stage - 2. Development of TEO of the project.

Stage - 3. Development of the base project      documentation.

Stage - 4. Development of the detailed design      documentation in full set and scope which is required for the realization      of the construction of the facility.

Stage - 5. Field construction supervision.

Stage - 6. Works on updating and approval of the      process regulation.

Stage - 7. Execution of the works on development of      the technical and engineering concept for the project “Construction of a      mini-GCPT on the territory of the BCS South Kemachi”.

Utilization of the low pressure gases at gas fields South Kemachi, Kruk, Western Kruk, Northern Urtabulak and Umid - BCS South Kemachi

Customer: State Joint Venture “Uzbekenergo”
 General Contractor: None

The first successful application of Project Management solution in Uzbekistan.

Project implementation terms: 8 months from the date of signing of the Project management contract

Construction of Gas Booster Compression Station (GBCS) with auxiliary equipment and infrastructure to provide 478MW CCP with fuel gas . Capacity 90 000 nm3/h of 2 centrifugal compressor units with electrical drive.

During the project implementation, the active application of project management scheme allowed the Customer to refrain from the scheme of project transferring to a single general contractor, as well as significantly reduce project cycle. Considering the average duration of similar projects in Uzbekistan of 24 months, “Uzbekenergo” has completed the whole project in 8 months from the date of engagement of East-West Engineering in the project. Basic and detailed design was fully done by the company in Uzbekistan.

Construction of a Booster Compressor Station (BCS) to supply fuel gas to the CCP 478 MW “Navoiy”

End Customer: Mubarek USC.
General Contractor: KMPO Motor Ltd (Russia)

The BCS is used for compression of the gas in the volume of 5 billion m3/year.

Stage - 1. Development of main technical solutions for all disciplines, process calculations, development of the process flow diagrams (P&ID), data sheets.

Design for the new construction of the booster compressor station (BCS) at Alan field

Construction of booster compressor station at Northern Nishan field on turn-key basis to maintain the pressure at the inlet to the gas processing unit during decrease of the formation pressure. The BCS will provide the compression of the gas, supplied from the gas-condensate field in the volume of 6.02 million m3 a day with the outlet pressure of 31.5 barg at the beginning of the operation (2014) and 1.6 million m3 a day with the outlet pressure of 5.0 barg by the end of the operation period (2033). The outlet pressure from the BCS is 80.0 bar.

Stage-1: Development of the TEO and support during      approval with the state bodies.

Stage-2. Development of a base project of the BCS      including the solutions of the base design. At this stage the main technical      solutions were implemented that touched all the sections of the project,      process calculations, diagrams, data sheets, specifications and the list      of equipment.

Pre-preparation and development of the documentation for the construction of the booster compressor station (BCS) at gas field Northern Nishan

Our Projects

From the year of foundation in 2011 to the present, East-West Engineering and its regional subsidiaries worked in the following projects: